Quick Answer: How Do You Cut Window Blinds That Are Too Long?

How long do window blinds last?

8 yearsMost blinds and shades have a life of about 7 or 8 years, so it may be time to move up to a more contemporary look..

Will Home Depot cut blinds not purchased there?

Thanks! Unless they were bought from Home Depot, they will not be cut by Home Depot. Chances are, they won’t fit the machine.

Should blinds cover the window frame?

If you have an old or damaged window trim, outside mount blinds will cover the frame and window trim completely. If you’re installing blackout window treatments to block unwanted light, then you should use outside mount blinds.

Does spotlight cut blinds to size?

Spotlight do sell ones that say that you can cut the wooden blinds to size yourself. There’s not much difference, but in a quick comparison, I thought the Bunnings ones were a bit thicker and a bit nicer. No they dont. But Spotlight do have a off the shelf cutdown service.

How much can you cut off blinds?

Unlike the cuts to the headrail, always cut 1/2 of the measurement off of each end of the blinds, no matter how small the cut is. This is to ensure that the strings that control the blinds are still evenly spaced from each side when the cuts are completed.

Can you shorten the length of blinds?

Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.

How do you fix the pull cord on horizontal blinds?

This is what I did:Let the blind all the way down, tilt the blinds into horizontal position.Remove the bottom rail button, cut off or untie the knot on the old. … Use superglue to glue the end of the the new cord to the old one. … Once the glue is dry, verify the. … Carefully pull on the old. … Once the joint.

How much longer than window should blinds be?

Because you’re mounting the blinds outside the window on the wall above, they need to be slightly wider and taller than the opening. We recommend going at least 2″ wider than the opening on either side, so 4″ total.

Can you cut day and night blinds to size?

Can a Day & Night Blinds be cut to size? A Day & Night blind can be cut to size, much like a roller blind, however, it is a difficult process to ensure that each layer of material is cut exactly the same, the roller mechanism is cut to the right size and you aren’t left with any fraying or jagged edges.

What do I do if my blinds are too long?

How To Shorten Blinds:Pry the plugs out of the bottom rail with a flat head screwdriver. … Look at your window sill and make note of the desired new length of your blinds. … Remove the bottom rail and slats necessary to shorten the blind. … Insert each of the lift cords through the bottomrail hole.More items…•Feb 13, 2014

Can you cut blinds that are too wide?

Occasionally window blinds are mis-measured and are too large to fit in the window frame. Most horizontal blinds such as wood blinds and faux wood blinds can be trimmed or cut down to the right width so they can be installed.

Can you adjust the length of cordless blinds?

These shades work with a lift mechanism either through the headrail or the bottom rail. … To adjust, open or close them, you can either lift them or lower them.